10 steps you should not miss when detailing your car

Maintaining a car is a never-ending process. It involves multiple things from regular cleaning and maintenance to oil change and replacing fixtures to brake testing. When we specifically about car detailing people who have never taken their vehicles for detailing; mistakenly mix it with modification and customization. In contrast to that, detailing involves deep vehicle maintenance both from the exterior and interior of the car to enhance its look at the best. To take the maximum benefits of this process, all steps should be performed in a right sequence.

Whether you are availing car detailing deals in Dubai or you are going to do it on your own, understanding the sequence and activities of different stages of this process is necessary. Here I am sharing few essential steps you should not miss while detailing your vehicle.

 Start cleaning wheels and tyres

You might be feeling doubtful after getting this recommendation from experts to start cleaning with wheels and tires. There are two practical reasons for this. Firstly, if you leave them for the end, the moisture will etch paint and cause water spots. Instead of water marks, spraying will also deposit dirt on surfaces. Therefore, it is important to pay special attention while picking supplies. You can’t use same harsh chemicals on everything. Always apply a right product to work on dirt and grime and then use a soft-bristled brush to remove the deposits.

 Proceed washing the exteriors

Washing should be started from the roof. Arrange all tools and chemical supplies from car shampoo/soap, wash mitt and microfiber towels. Avoid using a running hose to prevent massive water wastage. Two bucket wash method should be preferred. It involves using one bucket to prepare washing solution whereas another one is used for rinsing. Don’t flush this toxic wash off into domestic drains, as it eventually contaminates freshwater bodies like lakes and rivers. Steaming is another efficient method you can use to save water. It significantly reduces the total number of water gallons from 40 gallons to one gallon, which is used in traditional washing method. It’s better to use a specific product for windows and windshield. Especially, if the glass is tinted it needs to be wiped with an ammonia free products. Always work on the glass from both the exterior and interior.

 Continue with a clay bar

Once exteriors are being washed and dried; you should proceed to wipe the surface gently with a clay bar. Trim it into a shape that can be held and glide comfortably with hand to take up microscopic contaminants from painted body surfaces, windows, and windshield glass. You only need to use it softly and replace before it becomes extremely dirty and start causing scratches. Smooth movement without sticking indicates that process is completed and the surface can be finally wipe down with a microfiber towel.

  Apply polish

This becomes necessary if a surface has developed scratches and swirls. Newcomers should use dual action polisher as they are easy to use. However, professionals can use a rotary buffer for this purpose. Polishing can be even performed with hand. Start with less abrasive compounds as they are easy to use and cause minimum damage. In contrast to that highly abrasive products are only used by professionals to remove painting defects.

 Carry on waxing

Once you have washed, polished or cleaned the car, next step involves smearing the body with wax. Depending on the type of look you are willing to attain, Natural Carnauba or Synthetic Wax can be used. The primary aim of waxing the surface is to protect painted surface from harsh environmental conditions and maintain the shine and luster if possible.

Apply tyre shiner

As you have started detailing with tyres, the process ends with an application of shiner. Don’t drive unless they are completely dry. If you drive with wet tyres, shiner will splash not only over the painted surface but also accumulate dust.

Steam interior surfaces

Once you have steamed the exterior side, start detailing interiors. Remove the carpets separately and steam all the nooks and corners. For better results, you can also use a soft bristle brush to remove dust from seat creases and door pockets.

Use a suitable product for upholstery

There is a range of cleaners available in the market that can remove a wide range of stains from mud, blood, food spills and pet stains from materials like leather, suede, vinyl, and fabric. Steam before applying the product to enhance its penetration and action.

Wipe vinyl surfaces with all-purpose cleaner

A multi-purpose glass cleaner can efficiently work on everything from dashboard, steering, wheel and console. This fixture often needs frequent scrubbing as they are getting in touch continuously with human body

 Finally, sanitize the air vents

Again, steam can completely sanitize and sterile air vents, which carries a heavy load of harmful bacteria and bad odors.

Summary: Car detailing is all about cleaning and restoring the original shine of vehicles in a stepwise process using a combination of tools and products. Understanding these steps is necessary whether you are availing a deal or doing it on your own.